Isolated Footing with Pocket on Pedestal
For an isolated footing with pocket on pedestal, in the Pocket dialog box, you can define various settings:
Isolated Footing with Pocket on Pedestal - Pocket Longitudinal dialog box
Longitudinal
Main Starter Bars
-
Reinforcement type: select the shape of the longitudinal main reinforcement:
-
Vertical links: vertical link starter bar
-
- U shaped bent: U shaped simple return starter bar
- U shaped anchored: U shaped anchored return starter bar
-
Minimum diameter: define the minimum diameter to be used in main reinforcement calculation.
-
Maximum diameter: define the maximum diameter to be used in main reinforcement calculation.
Secondary Starter Bars
-
Quantity along X / Y: define the number of secondary starter bars along X / Y.
-
Reinforcement type: select the shape of the longitudinal secondary reinforcement.
-
Rebar type along X / Y: define the diameter of the secondary starter bars along X / Y.
Transversal
Isolated Footing with Pocket on Pedestal Transversal dialog box
Links
-
Reinforcement type: select the reinforcement type:
-
Single link: horizontal shaping exterior link
-
- Multiple link: horizontal shaping exterior interior link
-
Minimum / Maximum spacing: define the minimum / maximum clear distance between bars for the transverse reinforcement.
-
Minimum / Maximum diameter: define the minimum / maximum diameter to be used in transverse reinforcement calculation.
-
Extend links: check this box if you want the links to be extended into the footing.