How do I configure which manual labels are used?

 
  • Information
  • Software
    Autodesk Advance Steel
  • Module
    Autodesk Advance Steel - Detailing
  • Version
    > 2009
  • Type
    General
  • Difficulty
    ***

When we add manual labels on detail drawings in Advance Steel, we have the option to configure their content and from which category they are selected.

In order to control the label content definition, we have two defaults : "Additional label considering the function" and "Additional label considering the type". They are in the Management Tools, in the "Defaults" section.

How do I configure which manual labels are used

There are three cases that these defaults control:

  • A) All the elements take the label from the section : Any. This ignores the model object type (e.g., Plate). Both "Additional label considering the function" and "Additional label considering the type" must be set to 0.
  • How do I configure which manual labels are used

  • B) The model object type is taken into consideration, but the label will be given from the Any category for the different model object types, ignoring if the element is a Single Part or Main Part. "Additional label considering the type" is set to 1, and "Additional label considering the function" is set to 0.

  • How do I configure which manual labels are used

  • C) The label is set from the model object type category, and it will take into consideration if it is a Single part of a Main part. Both "Additional label considering the function" and "Additional label considering the type" must be set to 1.

How do I configure which manual labels are used

GRAITEC GROUP 2017 At GRAITEC we take privacy seriously. Please read our privacy policy.