GRAITEC Advantage - FAQ feed GRAITEC Advantage - FAQ feed

GRAITEC FAQ News

How is the calculation on steps option used?

  • Software:

    Advance Design
  • Module

    All
  • Question:

    How is the calculation on steps option used?
  • Type:

    Modeling
  • Difficulty:

    ***

Answer

When an analysis of a structure has different behavior in different stages (for example, prefabricated elements which have an articulated static schema in mounting stage and later become rigid after finalizing the connections or a comparison of a concrete structure by also taking into account the cracked state) it can be done with Advance Design using the Calculation on steps option.

In the following example, the displacements and the efforts distribution will be determined for a concrete frame subjected to gravitational and lateral loads, considering two different stages of the concrete used: The sectional efforts corresponding to the situation in which the concrete of the beams is unchanged and the displacements of the same frame corresponding to the situation when the concrete in the beams is cracked.

How is the calculation on steps option used

The structural model will be defined with all the load cases and combinations corresponding to each step of the analysis.

How is the calculation on steps option used

The analysis model is created by clicking the Analysis button in the Pilot and in the Calculation sequence window only Verify, Mesh and Evaluate are checked.

How is the calculation on steps option used

After creating the analysis model, the calculation steps can be defined. Open the Calculation sequence window from the Tools - Calculation on steps menu.

How is the calculation on steps option used

In the Calculation sequence window the required number of the steps is added by clicking the Add button. In this example 2 steps are added.

How is the calculation on steps option used

NOTE: In the Calculation sequence window not only the combinations are added but also the load cases contained in these combinations.

The same steps will be followed for the other phase by adding the corresponding load cases and combinations.

Check the Enable calculation on steps and Pause calculation after every step options.
Validate the input by clicking the "OK" button.
Because the analysis model is already created and also meshed, the finite element calculation can be started for the first phase: Analyze - Calculate. Only the Finite elements calculation option must be checked.

How is the calculation on steps option used

After the calculation is finished, the properties of the materials of the structural elements will be modified according to the cracked behavior state and the structural system will be recalculated taking the new hypotheses into consideration.

How is the calculation on steps option used


How is the calculation on steps option used

Forces - My combination 102 (material rigidity unchanged) and combination 104 (material rigidity modified)


How is the calculation on steps option used

Displacements - D combination 102 (material rigidity unchanged) and combination 104 (material rigidity modified)