GRAITEC Advantage - FAQ feed GRAITEC Advantage - FAQ feed

GRAITEC FAQ News

How are bending details automatically created?

  • Software:

    Autodesk Advance Concrete
  • Module

    Reinforcement
  • Question:

    How are bending details automatically created?
  • Type:

    General
  • Difficulty:

    *

Answer

To create automatic bending details for reinforcement bars use the "Automatic drafting - Bending details" command from the "Advance Reinforcement" toolbar.

How are bending details automatically created

We will use a reinforced column and a reinforcement drawing in our example.

How are bending details automatically created

To create the bending detail, select the command and the program will ask you to choose the elements.
Select the bars, press "Enter", and then choose where to display the bending details for the selected bars.

How are bending details automatically created

The "Automatic drafting - bending details" command creates details for all the bars, including bars with the same mark. In other words, if there are 2 bars with mark No. 5, the command will display 2 bending details. The user can delete the bending details that are unnecessary.
Also the user can choose a symbol for different bar types. This option is available when you use the command. On the command line, the program will ask you to "choose elements" or "Settings".

How are bending details automatically created

Press "S" and a dialog box will appear where you can choose the symbol to display. The user can choose different symbols for straight bars, frames, stirrups, pin bars and other bars.

How are bending details automatically created

The user can choose the symbol from 2 places:

1. The combo box provides a list of the folder where the symbols are registered and classified.

How are bending details automatically created

2. The symbols folder provides a symbols list where you can also see the content of the symbol.

How are bending details automatically created

The user can choose if the bending detail of the frame can be unfolded.

How are bending details automatically created

To create bending details only for one mark, select it with the Multicriteria selection option and apply the command for detailing.

How are bending details automatically created

The program will select only the bars with mark No.1, for example, and generate bending details only for the bars with mark No1.

How are bending details automatically created